technical data sheet micro rf slide-on adapter 15s132-k04 l5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 3 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to iso 2768 m-h interface according to sma iec 169-15 15k101-40m, rf test switch material and plating connector parts material plating center contact beryllium copper aurodur?, gold plated outer contact brass aurodur?, gold plated outer contact brass aurodur?, gold plated inner spring stainless steel insulator ptfe coupling nut brass aurodur?, gold plated outer spring stainless steel
technical data sheet micro rf slide-on adapter 15s132-k04 l5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 3 rf_35/12.04/3.0 electrical data impedance 50 frequency dc to 6 ghz return loss -28 db, dc to 2 ghz -25 db, 2 to 4 ghz -21 db, 4 to 6 ghz insulation resistance 0.5 x10 3 m center contact resistance 50 m outer contact resistance 50 m working voltage 4 v mechanical data mating form slide-on mating cycles > 200,000 mating force 4 n unmating force 2 n environmental data temperature range -40c to 90c 2002/95/ec (rohs) compliant installation recommendation for the installation measurement device press-down adapter sma interface
technical data sheet micro rf slide-on adapter 15s132-k04 l5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 3 / 3 rf_35/12.04/3.0 mating and un-mating for the reliable mating and un-mating follow the precautions : 1. the vertical mating axis of the pcb receptacle and the adapter has to be aligned during the connecting and a hearable click will confirm that the connectors are mated correctly. 2. the disconnection of the 2 connectors is ca rried out by vertical pulling of the adapter. 3. the connectors should not be mated under an extreme angle. 4. the mating force should be in the limits 5 n f 10 n m i s a l i g n m e n t m a x . 5 packing standard 1 pcs in plastic bag draft date approved date rev. engineering change number name date michelmann folke 17/01/06 mic helmann folke 08/05/08 d00 08-0303 michelmann, folke 08/05/08 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be co nstrued as recommendation to infringe exis ting patents. in the effort to improve ou r products, we reserve the right to ma ke changes judged to be necessary.
|
